DELLORTO

Engineered for riders who expect more, the adjusting screw 5x81mm idle si 20d, si 24 e-g dependable performance. "Adjusting Screw idle SI 20D, SI 24 E-G 5x81 mm, DELL'ORTO" can be used on of LML, MOTOVESPA and VESPA A must-have for any scooter enthusiast.Fitment:LML Star 125 2T/ DLX / Via Toscana /..

..

Perfect for maintenance or restoration, the mixer tube av266 (phbh 28 carburettor) blends durability with styling. Partial load or half gas can be reached when the gas slide valve is 1/4 to 3/4 open. Jet needles and mix tube are responsible for regulating the mix in this area. If the engine splutter..

Upgrade your scooter with the mixer tube av262 (phbh 28 carburettor), for precision fit and lasting performance. The mixer tube which is located in the middle of the jet block between the main jet and the main correction jet is responsible for regulating the mix in the partial load or half range (1/..

Perfect for maintenance or restoration, the mixer tube be3 (si 20.15-17 a-d/20.20 -26.26e/g/h/27.23) blends durability with styling. The mixer tube which is located in the middle of the jet block between the main jet and the main correction jet is responsible for regulating the mix in the partial lo..

Perfect for maintenance or restoration, the cable bend (phbg/phbh /phbl/phf/phm 50° ) blends durability with styling. If you install a tuning carburettor the and choke cable often hit it at another angle than was on an carburettor. In order to prevent the cables getting kinks or damaged due to the u..

Perfect for maintenance or restoration, the cap slide si 24-26 e/g/h (vespa px200/t5/cosa 200) blends durability with styling. "Cap DELL'ORTO, slide SI 24-26 E/ Manufactured by Vespa, for quality and reliability. Ideal for daily use or long-term preservation.Fitment:MOTOVESPA 200 DS 200 9DS 2T AC '7..

Perfect for maintenance or restoration, the choke jet 75 for phb/?vhst carburettor blends durability with styling. Combining style, , and easy installation.Fitment:..

Engineered for riders who expect more, the choke jet 70 for phb/?vhst carburettor dependable performance. If the choke is pulled on up the scooter, the mix is . The PHB carburettors also have a choke jet through which the mix can be further when the choke is pulled. We stock the DELL’ORTO jets for t..

Give your ride a fresh touch with the choke jet 45 for phb/?vhst carburettor, made to match factory specifications. If the choke is pulled on up the scooter, the mix is . The PHB carburettors also have a choke jet through which the mix can be further when the choke is pulled. We stock the DELL’ORTO ..

Perfect for maintenance or restoration, the choke jet 60 (carburettor si 20.20 - 24.24h) blends durability with styling. If the choke is pulled on up the scooter, the mix is . The carburettor has a choke jet through which the mix can be further when the choke is pulled. We stock high quality DELL'OR..

Upgrade your scooter with the float needle (4,5 mm, for si 20.15 - 26.26d/e/g/phb carburettor - 3,7x3,7mm), for precision fit and lasting performance. The float needle is a component that cannot be underestimated as it forms the binding link between the fuel tank and the carburettor. If the needle i..